LS9-16 1 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.]]>
1 1420 1000 400 400 200 200 100 20.3999999999999 114 1 2;17;45;22;24;21;23;33;34
01V96i/01V96 1 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
MY8-ADDA96
- Use MY8-ADDA96 in AE96 or AE mode.
Y56K/Y96K
- You cannot store scenes using Y56K or Y96K to 01V96 scene memory 97-99.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
MY16-CII
- MY16-CII is compliant with V2.30 or later (for 01V96).
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 710 310 200 200 200 200 0 12.57 118 1 17;45
01V 1 MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
RN.141.MY
- Use RN.141.MY by setting the mode to 8AE.]]>
1 700 0 200 200 150 150 50 11 123 2 6;9;10;11;12;14;16;17;18;19;36;20;39;41;45;46;21;23;28;26;38;40;25;44;42;33;34;29;30;47;48
AD824 1 RN.141.MY
- Use RN.141.MY by setting the mode to 8AE.]]>
1 700 0 200 200 150 150 20 10.4 202 2 1;2;3;4;5;6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;21;23;27;28;38;40;25;44;42;33;34;47;48
DA824 1 RN.141.MY
- Use RN.141.MY by setting the mode to 8AE.]]>
1 700 0 200 200 150 150 20 10.4 203 2 1;2;3;4;5;6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;21;23;27;28;38;40;25;44;42;33;34;47;48
AW2400 1 1 740 310 200 110 80 90 50 8.82 503 1 2;7;9;17;18;19;36;20;39;41;45;22;46;21;23;27;26;38;40;25;44;43;37;42;33;29;30;48 AW2816 1 Y56K/Y96K
- AW2816 firmware must be V1.1 or later to use Y56K
- Y96K will be recognized as Y56K.
Pivitec e16i/o-MY
- AW2816 only support 8 channels and will not be compatible with the initial release of the e16i/o-MY card.]]>
1 500 500 200 110 150 150 50 5.79999999999999 502 1 6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;28;26;38;40;25;44;43;37;42;29;30;48
DME24N 1 General
- Digital I/O card even which does not support 96kHz operation can handle 96kHz audio when "double channel mode" is set on the host machine. (Number of audio transmission channels halves in this mode.)

MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY8-ADDA96
- When MY8-ADDA96 is set to AE96 mode, do not set the host DME24N to double channel mode (it will not operate correctly).
AVIOM16/o-Y1, AVY16-ES,MY16-MD64
- AVIOM16/o-Y1, AVY16-ES and MY16-MD64 are supported with the software V1.2 or later.
MY16-CII
- Firmware V2.01 or later will be required in order to recognize MY16-CII card.
- Update is necessary for AVIOM6416Y2 with serial number earlier than #10099. For details, please refer to the following URL.
http://www.aviom.com/adspProduct6416y2.cfm?sec=products&cat=pro64&ln=6416y2
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY4-AEC
- In order to use MY4-AEC card, firmware V4.0 or later will be required.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 710 1020 200 110 80 90 100 3.75 304 1 22;24;21;23;33;34
DSP5D 2 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY16-MD64
- Use two cards (one master card and one slave cards) as one set.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 1420 2400 400 400 400 400 0 31.0199999999999 120 1 2;17;45;22;24;21;23;33;34
DM1000 2 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
MY8-ADDA96
- Use MY8-ADDA96 in AE96 or AE mode.
MY16-MD64
- Use two cards (master and slave card) as one set.
MY16-CII
- MY16-CII is compliant with V2.30 or later.
- Y96K is compliant with V2.01 or later.
- You cannot store scenes using Y56K or Y96K to DM1000 scene memory 97-99.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 1420 620 400 400 400 400 0 25.1499999999999 116 1 17;45
LS9-32 2 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
MY16-MD64
- Use two cards (one master card and one slave cards) as one set.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.]]>
1 1420 1000 400 400 200 200 100 20.3999999999999 113 1 2;17;45;22;24;21;23;33;34
SREV1 2 MY8-AD96
- MY8-AD96 is recognized as MY8-AD.
AP8-AD/AP8-DA
- AP8-AD/AP8-DA is recognized as "Unknown Card".]]>
1 500 0 400 400 200 200 50 13.5 306 2 4;6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;21;23;27;28;26;38;40;25;44;43;37;42;33;34;29;30;47;48
AW4416 2 Y56K/Y96K
- AW4416 Firmware must be V2.0 or later to use Y56K
- Y96K will be recognized as Y56K.]]>
1 500 500 400 220 160 180 50 7.2 501 1 6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;28;26;38;40;25;44;43;37;42;29;30;47;48
M7CL 3 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
MY16-MD64
- MY16-MD64, use three cards (one master card and two slave cards) as one set.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.]]>
1 2130 3060 600 600 300 300 100 35.75 121 1 2;45;22;24;21;23;33;34
PM5D/PM5D-RH 4 General
- Digital I/O card even which does not support 96kHz operation can handle 96kHz audio when "double channel mode" is set on the host machine. (Number of audio transmission channels halves in this mode.)

MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
- When using MY8-LAKE with the PM5D/PM5D-RH, a hardware upgrade for the PM5D/PM5D-RH is necessary.
Y96K
- System software V1.10 or later will be required in order to recognize Y96K card.
MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE96 or AE.
- When MY8-ADDA96 is set to AE96 mode, do not set the host PM5D/PM5D-RH to double channel mode (it will not operate correctly).
MY16-MD64
- Use four MY16-MD64 cards (one master card and three slave cards) as one set.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 2840 4800 800 800 800 800 0 62.0399999999999 119 1 45;22;24;21;23;33
02R96 4 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
MY8-ADDA96
- Use MY8-ADDA96 in AE96 or AE mode.
MY16-CII
- MY16-CII is compliant with V2.30 or later.
MY16-AE/-AT/-TD
- MY16-AE/-AT/-TD is compliant with V1.06 or later, and V2.0 or later is required to use all 16 channels for surround monitoring.
Y56K/96K
- Y56K/96K can be used either in Slot 4, 5, and/or 6.
- You cannot store scenes using Y56K or Y96K to 02R96 scene memory 97-99.
MY16-MD64
- Use four cards (One master and three slaves) as One set.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 2000 1000 800 800 600 600 80 39.2999999999999 117 1 17;45
DME64N 4 General
- Digital I/O card even which does not support 96kHz operation can handle 96kHz audio when "double channel mode" is set on the host machine. (Number of audio transmission channels halves in this mode.)

MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

MY8-ADDA96
- When MY8-ADDA96 is set to AE96 mode, do not set the host DME64N to double channel mode (it will not operate correctly).
AVIOM16/o-Y1, AVY16-ES
- AVIOM16/o-Y1, AVY16-ES are supported with the software V1.2 or later.
MY16-MD64
- MY16-MD64 are supported with the software V1.2 or later.
- Use four cards (one master card and three slave cards) as one set.
MY16-CII
- Firmware V2.01 or later will be required in order to recognize MY16-CII card.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY4-AEC
- In order to use MY4-AEC card, firmware V4.0 or later will be required.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 2840 4080 800 440 320 360 0 15 303 1 22;24;21;23;33;34
DME32 4 AP8-AD/AP8-DA
- DME32 unit with serial numbers starting from Q needs modification to be used with these cards. Please talk to your local Yamaha service center for details.
MY8-AD96 and MY8-DA96
- Fully supported with DME32 FirmwareV1.52 or later.
- With DME32 FirmwareV1.51 or before, MY8-AD96 and MY8-DA96 card names are not displayed.
MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
RN.141.MY
- Use RN.141.MY by setting the mode to 8AE.]]>
1 1000 0 800 440 320 360 100 14.4 305 2 10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;28;38;40;25;44;42;33;34;47;48
D24 4 AP8AD
- Only Slot 1 or 2 can be used.
- Only MY8-AT, MY8-TD, MY8-AE can be used in Slot 1 or 2 simultaneously with AP8AD.
AP8DA
- D24 firmware must be V2.0 or later to be used with AP8DA
- Only Slot 3 or 4 can be used.
- No other cards can be used in Slot 3 or 4 simultaneously with AP8DA.]]>
1 1000 0 800 800 800 800 30 12.0999999999999 504 2 6;7;9;10;11;12;14;16;17;18;19;36;20;39;41;45;24;46;27;28;26;38;40;25;44;43;37;42;33;34;29;30;47;48
DM2000 6 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
MY8-ADDA96
- Use MY8-ADDA96 in AE96 or AE mode.
MY16-MD64
- Use four cards (One master and three slaves) as One set.
MY16-CII
- MY16-CII is compliant with V2.30 or later.
MY16-AE/-AT/-TD
- MY16-AE/-AT/-TD is compliant with V1.14 or later and V2.0 or later is required to use all 16 channels for surround monitoring.
Y56K/Y96K
- Y96K is compliant with V2.11 or later.
- You cannot store scenes using Y56K or Y96K to DM2000 scene memory 97-99.
- Y56K/96K in Slot 4, 5, and/or 6.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).]]>
2 3000 1500 1200 1200 900 900 120 58.95 115 1 45
DIO8(PM1D) 8 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
MY8-AD96
- MY8-AD96 is recognized as MY8-AD24.
MY8-ADDA96
- Use MY8-ADDA96 by setting the mode to AE.
AVIOM16/o-Y1/AVIOM6416Y2/AVY16-ES/ AVY16-ES100/YG2/YS
- AVIOM16/o-Y1, AVIOM6416Y2, AVY16-ES, AVY16-ES100, YG2 and YS2 are recognized as YAMAHA 8ch MY card, and 8IN/8OUT audio data transmission is possible.
RN.141.MY
- Use RN.141.MY by setting the mode to 8AE.
Pivitec e16i/o-MY
- DIO8 only support 8 channels and will not be compatible with the initial release of the e16i/o-MY card.]]>
1 4000 1600 2400 1200 800 800 160 70.48 122 1 10;11;12;14;16;17;18;19;36;20;45;24;28;40;25;44;42;33;34;48
TX6n/TX5n/TX4n 1 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.

RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
MY8-AE96S
- Input channels of MY8-AE96S card cannot be selected as the word clock master when working at 88.2KHz/96KHz.]]>
2 780 400 400 200 80 90 0 4 401 2 2;13;14;15;16;17;39;41;45;22;24;21;23;27;28;44;33;34;29;30
CL5/ CL3/ CL1 3 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.]]> 1 2130 1200 1200 600 405 405 135 35.7599999999999 111 2 2;17;45;22;24;21;23;33;34 MTX5-D 1 MY8-LAKE

- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
Other
- External word clock supplied via a Mini-YGDAI card slot may cause noise in system configurations with multiple YDIF connections. In such cases, we recommend to choose another word clock source, such as Dante or YDIF.]]> 1 710 310 200 110 80 90 0 4 302 2 2;13;17;22;24;25;33;34;47 QL5/ QL1 2 1 1420 800 400 400 270 270 135 21.8399999999999 112 2 2;17;45;22;24;21;23;33;34;47 RSio64-D 4 General
- Double Channel mode (for higher sample rates) is not supported.
- If the card supports Native (or Generic) mode, set the switch on the card to Native (or Generic) to use with the RSio64-D.

MY8-LAKE
- Do not select as the word clock source for the RSio64-D: it will not work correctly.
MY8-AEB
- Set the AE/RSVD switch to the RSVD position on the card. If the card is selected as the word clock source for the RSio64-D, It synchronizes to input channel 7/8.
AVIOM16/o-Y1
- Select either 16ch or 8 ch mode, as this card will not work correctly in AVIOM mode. Do not select this card as the word clock source for RSio64-D when it is in 8ch mode: it will not work correctly.
Dugan-MY16
- Do not select this card as the word clock source for the RSio64-D when it is in LINK mode: it will not work correctly. In AUDIO mode, this card can be selected as the clock source so long as recognized ADAT signals are input. - Do not enable the SRC of RSio64-D when the card is in LINK mode: it will work correctly.
WSG-Y16
- Do not select this card as the word clock source for the RSio64-D: it will not work correctly.]]>
1 2840 1600 800 800 540 540 0 24 201 2 2;17;45;22;24;21;23;33;34
MRX7-D 1 MY8-LAKE
- Input channels of MY8-LAKE card cannot be selected as the word clock master.
- As LAKE processing runs at 96kHz, SRC works automatically against 44.1kHz/88.2kHz audio signals.
RN.141.MY
- Use RN.141.MY by setting the mode to 16AT.
Other
- External word clock supplied via a Mini-YGDAI card slot may cause noise in system configurations with multiple YDIF connections. In such cases, we recommend to choose another word clock source, such as Dante or YDIF.]]>
1 710 310 200 110 80 90 0 4 301 2 2;13;17;22;24;25;31;32;47
CS-R10 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 101 2 2;13;17;45;22;24;21;23;33;34
DSP-R10 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 108 2 2;13;17;45;22;24;21;23;33;34
RPio622 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 109 2 2;13;17;45;22;24;21;23;33;34
RPio222 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 110 2 2;13;17;45;22;24;21;23;33;34
CS-R10-S 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 102 2 2;13;17;45;22;24;21;23;33;34
CSD-R7 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 103 2 2;13;17;45;22;24;21;23;33;34
CS-R5 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 104 2 2;13;17;45;22;24;21;23;33;34
CS-R3 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 105 2 2;13;17;45;22;24;21;23;33;34
DSP-RX 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 107 2 2;13;17;45;22;24;21;23;33;34
DSP-RX-EX 2 MY8-LAKE
- Do not select this card as the word clock source for the CS-R10: it will not work correctly.
Dante-MY16-AUD/Dante-MY16-AUD2
- Dante-MY16-AUD/Dante-MY16-AUD2 does not support the SINGLE mode when it is using high sampling (88.2kHz, 96kHz).
- HA remote control function is not supported.
AVY16-ES100
- HA remote control function is not supported.
MY16-ES64
- HA remote control function is not supported.
YG2
- HA remote control function is not supported.
RN.341.MY
- HA remote control function is not supported.
RN.141.MY
- HA remote control function is not supported.
]]>
2 1420 620 400 220 270 270 0 12 106 2 2;13;17;45;22;24;21;23;33;34