EMX5014C Powermixer

		EMX5014C
Outline
Mixing capability	Mixing channels	6 Mono + 2 Stereo +Return
	AUX	3 (incl. 1x Effect Send)
	MAIN	Stereo
	Input channel functions	CH1-6: HPF, Compressor, 3-band mid-sweep PEQ Insert I/O; CH7-10: HPF, 3 band PEQ; CH11-14: 3 band PEQ
	On-board processors	2x SPX, 2x 9-band GEQ, YSProcessing
I/O	Mic inputs	8
	Phantom power	+48V DC; ON/OFF
	Line inputs	4x Stereo
	Control and others	Foot switch
On-board amplifiers	Maximum output power @4ohms	500W/ch
	Maximum output power @8ohms	370W/ch (100V model), 350W/ch (120V model), 320W/ch (220-240V model)
	Output selection	500W, 200W, 75W; L/R, AUX1/MONO, AUX1/AUX2
General specifications
Total harmonic distortion		Less than 0.3%
Frequency response		0, +0, -3dB 20Hz-20kHz
Hum & noise level	Equivalent input noise	-128dBu
Hum & noise level	Residual output noise	-68dBu (Speaker out); -95dBu (Line out)
Crosstalk		-68dB
Protection circuit	Load protection	Power switch on/off mute, DC-fault (power supply shutdown/manual reset), Clip limiter (≧THD 1%; compression)
	Amplifier protection	Thermal (heatsink temp ≧90 degrees celsius; output mute/auto reset), Vl limiter (RL ≦2ohms)
	Power supply protection	Thermal (heatsink temp ≧100 degrees celcius; power supply shutdown/manual reset)
Cooling		2x Variable-speed fan
Power requirements		Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption		500W
Dimensions	W	444mm; 17-1/2in
	H	155mm; 6-1/8in
	D	493mm; 19-7/16 (12U)
Net weight		10.5kg; 23.2lbs
Accessories		Owner’s Manual, AC power cord

Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Input Level			Connector
Input Terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Sensitivity	Nominal	Max. before clip	Connector
CH INPUT A 1-6	0dB	-60dB	3kohms	50-600 ohm Mics	-80dBu	-60dBu	-40dBu	XLR-3-31 type ^*
	0dB	-16dB			-36dBu	-16dBu	+4dBu
	26dB	-34dB			-54dBu	-34dBu	-14dBu
	26dB	+10dB			-10dBu	+10dBu	+30dBu
CH INPUT B 1-6	0dB	-60dB	10kohms	600 ohm Lines	-80dBu	-60dBu	-40dBu	TRS phone jack
	0dB	-16dB			-36dBu	-16dBu	+4dBu
	26dB	-34dB			-54dBu	-34dBu	-14dBu
	26dB	+10dB			-10dBu	+10dBu	+30dBu
ST CH INPUT 7/8-9/10		-60dB	3kohms	50-600 ohm Mics	-80dBu	-60dBu	-40dBu	XLR-3-31 typek
		-16dB	3kohms	50-600 ohm Mics	-36dBu	-16dBu	-10dBu	XLR-3-31 typek
		-34dB	10kohms	600 ohm Lines	-54dBu	-34dBu	-14dBu	Phone jack
		+10dB	10kohms	600 ohm Lines	-10dBu	+10dBu	+30dBu	Phone jack
ST CH INPUT 11/12-13/14		-34dB	10kohms	600 ohm Lines	-54dBu	-34dBu	-14dBu	Phone jack, RCA pin jack
ST CH INPUT 11/12-13/14		+10dB	10kohms	600 ohm Lines	-10dBu	+10dBu	+30dBu	Phone jack, RCA pin jack
CH INSERT IN (1-6)		-	10kohms	600 ohm Lines	-20dBu	0dBu	+20dBu	Phone jack

* 0dBu= 0.775Vrms

Output Terminal	Actual Source Impedance	For Use with Nominal	Output Level		Connector
Output Terminal	Actual Source Impedance	For Use with Nominal	Nominal	Max. before clip	Connector
ST OUT [L,R]	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
ST SUB OUT [L,R]	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
AUX SEND 1,2	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
EFFECT SEND	150ohms	600ohm Lines	+4dBu	+20dBu	TRS phone jack
CH INSERT OUT 1-6	600ohms	10kohm Lines	0dBu	+20dBu	TRS phone jack
REC OUT [L,R]	600ohms	10kohm Lines	-10dBV	+10dBV	RCA pin jack
PHONES [L,R]	100ohms	8ohm / 40ohm Lines	1mW / 3mW	20mW / 75mW	ST phone jack
SPEAKER OUT	0.1ohms	4ohm Speakers	125W	500W	speakON Phone jack

* 0dBu=0.775Vrms. 0dBV =1.0Vrms