PC-D / DI Series

PC412-D PC406-D PC412-DI PC406-DI
Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven 16Ω 600W x 4 300W x 4 600W x 4 300W x 4
1200W x 4 600W x 4 1200W x 4 600W x 4
1900W x 4 900W x 4 1900W x 4 900W x 4
2500W x 4 1300W x 4 2500W x 4 1300W x 4
8Ω (BRIDGE mode) 3800W x 2 1800W x 2 3800W x 2 1800W x 2
4Ω (BRIDGE mode) 5000W x 2 2600W x 2 5000W x 2 2600W x 2
Hi-Z (70V mode) - - 1200W x 4 600W x 4
Hi-Z (100V mode) - - 1200W x 4 600W x 4
Amplifier class Class D, Single ended output Class D, Single ended output Class D, Single ended output Class D, Single ended output
Total harmonic distortion 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven) 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven) 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven), 0.01% (100V/70V, 1kHz, 10W, All channels driven), 0.1% (100V/70V, 1kHz, Half power, All channels driven) 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven), 0.01% (100V/70V, 1kHz, 10W, All channels driven), 0.1% (100V/70V, 1kHz, Half power, All channels driven)
Frequency response +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru) +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru) +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru) +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru)
Crosstalk ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted) ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted) ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted) ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted)
S/N ratio 112dB (8Ω, Gain setting = 32dB, A-weighted) 109dB (8Ω, Gain setting = 32dB, A-weighted) 112dB (8Ω, Gain setting = 32dB, A-weighted) 109dB (8Ω, Gain setting = 32dB, A-weighted)
Voltage Gain/Sensitivity 8Ω Volume max 32.0dB/+10.0dBu (Gain setting: 32dB), 26.0dB/+16.0dBu (Gain setting: 26dB), 38.0dB/+4.0dBu (Gain setting: +4dBu), 28.0dB/+14.0dBu (Gain setting: +14.0dBu) 32.0dB/+7.0dBu (Gain setting: 32dB), 26.0dB/+13.0dBu (Gain setting: 26dB), 35.0dB/+4.0dBu (Gain setting: +4dBu), 25.0dB/+14.0dBu (Gain setting: +14.0dBu) 32.0dB/+10.0dBu (Gain setting: 32dB), 26.0dB/+16.0dBu (Gain setting: 26dB), 38.0dB/+4.0dBu (Gain setting: +4dBu), 28.0dB/+14.0dBu (Gain setting: +14.0dBu) 32.0dB/+7.0dBu (Gain setting: 32dB), 26.0dB/+13.0dBu (Gain setting: 26dB), 35.0dB/+4.0dBu (Gain setting: +4dBu), 25.0dB/+14.0dBu (Gain setting: +14.0dBu)
Hi-Z 100V mode, Volume max - - 32.0dB/+10.2dBu (Gain setting: 32dB), 26.0dB/+16.2dBu (Gain setting: 26dB), 38.2dB/+4.0dBu (Gain setting: +4dBu), 28.2dB/+14.0dBu (Gain setting: +14.0dBu) 32.0dB/+10.2dBu (Gain setting: 32dB), 26.0dB/+16.2dBu (Gain setting: 26dB), 38.2dB/+4.0dBu (Gain setting: +4dBu), 28.2dB/+14.0dBu (Gain setting: +14.0dBu)
Hi-Z 70V mode, Volume max - - 32.0dB/+7.2dBu (Gain setting: 32dB), 26.0dB/+13.2dBu (Gain setting: 26dB), 35.2dB/+4.0dBu (Gain setting: +4dBu), 25.2dB/+14.0dBu (Gain setting: +14.0dBu) 32.0dB/+7.2dBu (Gain setting: 32dB), 26.0dB/+13.2dBu (Gain setting: 26dB), 35.2dB/+4.0dBu (Gain setting: +4dBu), 25.2dB/+14.0dBu (Gain setting: +14.0dBu)
Protection circuit Load protection POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically)
Amplifier protection Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically)
Power supply protection Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown
Cooling 7 step variable speed fan x 3, front to rear airflow 7 step variable speed fan x 3, front to rear airflow 7 step variable speed fan x 3, front to rear airflow 7 step variable speed fan x 3, front to rear airflow
Maximum input voltage +28dBu +25dBu +28dBu +28dBu
Input impedance 20kΩ (balanced) 20kΩ (balanced) 20kΩ (balanced) 20kΩ (balanced)
Sampling frequency rate 96kHz 96kHz 96kHz 96kHz
A/D D/A Converters AD: 24-bit linear; DA: 24-bit linear AD: 24-bit linear; DA: 24-bit linear AD: 24-bit linear; DA: 24-bit linear AD: 24-bit linear; DA: 24-bit linear
Dante Interface Channel count 16 IN with Dante Redundancy, 16 OUT 16 IN with Dante Redundancy, 16 OUT 16 IN with Dante Redundancy, 16 OUT 16 IN with Dante Redundancy, 16 OUT
Sampling frequency 96/88.2/48/44.1kHz 96/88.2/48/44.1kHz 96/88.2/48/44.1kHz 96/88.2/48/44.1kHz
Dante latency 0.25/0.5/1/2/5ms 0.25/0.5/1/2/5ms 0.25/0.5/1/2/5ms 0.25/0.5/1/2/5ms
Bit depth 32/24bit 32/24bit 32/24bit 32/24bit
Processors 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter
Latency Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz) Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz) Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz) Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz)
I/O Connectors Analog Input XLR-3-31 x 4 XLR-3-31 x 4 Euro block 6pin x 2 (4ch balanced input) Euro block 6pin x 2 (4ch balanced input)
Digital I/O Dante Interface: etherCON x 2 (Redundant/Daisy Chain) Dante Interface: etherCON x 2 (Redundant/Daisy Chain) Dante Interface: RJ45 x 2 (Redundant/Daisy Chain) Dante Interface: RJ45 x 2 (Redundant/Daisy Chain)
Lautsprecherausgang Neutrik speakON NL4 x 4 Neutrik speakON NL4 x 4 7.62mm Euro block 8pin x 1 7.62mm Euro block 8pin x 1
Control ports RJ45 x 1 RJ45 x 1 RJ45 x 1 RJ45 x 1
AC AC inlet (powerCON 20A) x 1 AC inlet (powerCON 20A) x 1 AC inlet (powerCON 20A) x 1 AC inlet (powerCON 20A) x 1
Others Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2)
Indicators Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED) Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED) Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED) Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED)
Power requirements 100V - 240V 50Hz/60Hz ** 100V - 240V 50Hz/60Hz ** 100V - 240V 50Hz/60Hz ** 100V - 240V 50Hz/60Hz **
Power consumption 1850W (1/8 MAX power, 2Ω, Pink noise at all channels), 190W (Idle), 105W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V) 1050W (1/8 MAX power, 2Ω, Pink noise at all channels), 165W (Idle), 100W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V) 1850W (1/8 MAX power, 2Ω, Pink noise at all channels), 190W (Idle), 105W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V) 1100W (1/8 MAX power, 2Ω, Pink noise at all channels), 190W (Idle), 100W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V)
Operating temperature 0°C to +40°C 0°C to +40°C 0°C to +40°C 0°C to +40°C
Storage temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C -20°C to +60°C
Dimensions W 480mm (18.90 inch) 480mm (18.90 inch) 480mm (18.90 inch) 480mm (18.90 inch)
H 88mm (3.46 inch): 2U 88mm (3.46 inch): 2U 88mm (3.46 inch): 2U 88mm (3.46 inch): 2U
D 528mm (20.79 inch) 528mm (20.79 inch) 528mm (20.79 inch) 528mm (20.79 inch)
Net weight 16.0 kg (35.3 lbs) 15.6 kg (34.4 lbs) 16.0 kg (35.3 lbs) 15.9 kg (35.1 lbs)
Accessories Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euro block plug 3.5mm 8p x 2, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4 Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euro block plug 3.5mm 8p x 2, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4 Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euroblock plug 3.5mm 8p x 2, Audio Input Euroblock plug 5.08mm 3p x 4, Cable tie x 4, Speaker Euroblock plug 7.62mm 8p x 1, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4 Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euroblock plug 3.5mm 8p x 2, Audio Input Euroblock plug 5.08mm 3p x 4, Cable tie x 4, Speaker Euroblock plug 7.62mm 8p x 1, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4
  • *Available in future firmware release
  • **Device operation has been confirmed within +/- 10% of the rated power supply voltage