RM-CG Decken-Array-Mikrofon

Dimensions W560 mm × D560 mm × H90 mm (Includes protrusion/microphone panel: 22 mm)
Connector RJ45
In Operation Temperature 0°C - 40°C
Humidity 30% - 90% (no condensation)
Storage Temperature -20°C - 60°C
Humidity 20% - 90% (no condensation)
Indicator Front Indicator (Mute/Unmute & Status), Network Port Indicator
Mount Ceiling mount (can’t replace a grid ceiling panel), Wire mount, VESA mount
Maximum Device Number with RM-CR 14 (without VXL1-16P, up to 16)
Dust Protection IP5X for dust protection (with terminal cover)
Plenum Rating UL2043 (with terminal cover)
Gewicht 5.6 kg
Power Requirements PoE (IEEE 802.3af), DC 48 V
Maximum power consumption 7.2 W
Accessories Construction description, (Guarantee), Grille x 1, Screws for grille (M3 x 8 mm) x 5*, Screw cover x 4, Cutting template x 1, C ring x 1, Screws for C ring x 2, Hanger angle x 1, Screws for hanger angle (M4 x 20 mm) x 5*, Terminal Cover x 1, Safety wire x 1, Binding band x 1, Clamp plate x 2 *Including a spare respectively
Ether1 Dante, Remote Control, WebUI, PoE
Cable Requirements Cat 5e or higher (STP)
Audio I/O Dante 1in/2out
Sampling Rate 48 kHz
Bit Depth 24 bit
Latency 58 ms (including signal processing), 22 ms (low-latency mode)
Frequency Response 160 Hz – 16 kHz (-10 dB)
Maximum Input Level of SPL (0dBFS) 117.8 dB SPL
Self Noise -0.8 dBA SPL
SN Ratio (Ref. 94 dB SPL at 1 kHz) 94.8 dBA
Sensitivity -23.8 dBFS/Pa
Dynamic Range 118.6 dBA
Signal Processing Multi Beam Tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain

External View

Frequency Response

Polar Pattern