Nicht mehr im Verkauf

DME64N, DME24NDigital Mixing Engine

Kann gescrollt werden

DME64N
DME24N
General specifications Internal processing 32bit 32bit
Sampling frequency rate Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz 44.1kHz, 48kHz, 88.2kHz, 96kHz
External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay Less than 0.85 ms (MY8-AD96 to MY8-DA96) Less than 0.5 ms
Dynamic range DA: 106 dB DA: 106dB; AD+DA: 106dB
Crosstalk -80 dB -80 dB
Power requirements Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption 80W 75W
Dimensions W 480mm; 18-7/8in 480mm; 18-7/8in
H 145mm; 5-3/4in (3U) 101mm; 4in (2U)
D 411.5mm; 16-1/4in 411.5mm; 16-1/4in
Net weight 9.5kg; 20.9lbs 8kg; 17.6lbs
Accessories Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 2x 16-pin Euroblock plug, 4x 8-pin Euroblock plug Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 16x 3-pin Euroblock plug
Total harmonic distortion - Less than 0.05% (20Hz-40kHz)
Frequency response - 0, +0.5, -1.5dB 20Hz-40kHz
Hum & noise level Equivalent input noise - -128dBu
Residual output noise - -82dBu
Outline I/O Mic inputs - 8 (Remote HA)
Phantom power - +48V DC; ON/OFF: per channel
AD converter - 24-bit; 128-time over sampling
Line outputs - 8
DA converter - 24-bit; 128-time over sampling

Analog input characteristics (DME24N)

Input terminal Actual load impedance For use with nominal Input level Connector
GAIN Nominal Max. before clip
CH INPUT 1-8 -58dB
+10dB
3kohms 50-600ohm Mics & 600ohm Lines -58dBu -38dBu Euroblock
+10dBu +30dBu

Analog output characteristics (DME24N)

Output terminal Actual load impedance For use with nominal Output level Connector
Nominal Max. before clip
OUTPUT 1-8 75ohms 600ohm Lines +4dBu
-2dBu
+24dBu
+18dB
Euroblock
PHONES 15ohms 8ohms 75mW 150mW Stereo Phone
40ohms 65mW 150mW

Digital input and output characteristics (DME64N)

Terminal From Format Level IN/OUT Connector
CASCADE IN PM5D - RS422 32(IN) D-sub Half Pitch Connector 68Pin (female)
DME64N - RS422 32(IN/OUT)
CASCADE OUT PM5D - RS422 32(IN) D-sub Half Pitch Connector 68Pin (female)
DME64N - RS422 32(IN/OUT)

Control I/O characteristics

Terminal Format Level Connector
USB USB1.1 0V-3.3V B type USB Connector
MIDI IN MIDI - DIN-5pin
OUT MIDI - DIN-5pin
THRU MIDI - DIN-5pin
WORD CLOCK IN - TTL/75ohms(terminated) BNC
OUT - TTL/75ohms BNC
GPI IN - 0V-5V Euroblock
OUT - TTL Euroblock
+V - 5V Euroblock
REMOTE - RS232C D-sub 9pin(male)
- RS422
ETHERNET Ethernet - RJ45
to page top

Select Your Location